Taking care of your machine
Taking care of your machine
Removing blockages from the Turbo Tool
Removing blockages from the brushbar
Resetting jammed brushbar
WARNING:
To reduce the risk of electric shock, turn the vacuum cleaner off and unplug from the electrical outlet
before performing maintenance/troubleshooting checks.
Disconnect the hose from the vacuum cleaner and remove any blockages found then reconnect the hose securely.
IMPORTANT:
For your safety, never try to access / replace brush bar drive belt. If problem persists please call
our careline: AU 1300 361 505 / NZ: 0800 800 900.
A red flashing light will indicate a jammed brushbar. To reset press the button on the side of you vacuum.
Removing debris from the brushbar
If the light continues to flash after resetting, the brushbar may still be blocked. Using a pair of scissors, cut
through any threads or hairs caught around the brushbar. To access brushbar:
Press the brushbar reset button again to ensure the blockage is fully cleared.
Press the two side buttons together
and pull apart.
Carefully use scissors to cut
out the blockage.
Realign turbo brush sides and
press together.
Summary of Contents for VX55
Page 10: ...Notes Notes ...
