Vax Careline:
AU: 1300 361 505
NZ: 0800 800 900
vax.com.au
vax.co.nz
22
Troubleshooting
If the main brush needs advanced cleaning, proceed as follows:
1. Ensure that the appliance is switched off (no LED is lit).
2. Position the robot upside down.
3. Unscrew the 3 screws as shown (Fig. 30).
4. Remove the support brush.
5. Remove the main brush as indicated (Fig. 31).
6. Clean main brush and support brush thoroughly of hairs and lint.
NOTE:
If necessary, carefully use scissors or tweezers.
NOTE:
If the brush is excessively dirty, it might be useful to replace it; see “Ordering accessories and spare parts”
on page 21.
7. Re-insert the main brush as indicated (Fig. 32).
8. Put the support brush back into place.
9. Screw in the 3 screws (Fig. 33).
Removing and cleaning the main brush
30.
31.
32.
33.
