Vax VS12 Instruction Manual Download Page 2

WELCOME TO VAX’S WORLD

You have just purchased a product designed with the most up
to date technology, following international safety standards.
It is manufactured using the highest quality materials available
in the market.
To make proper use of your floor shining appliance, carefully
read the instructions of this manual.
Keep this manual in a safe place; it will prove helpful in case
of doubts.

Fig.1

ASSEMBLY OF THE MACHINE (see figure 1)

Remove the machine from its carton box and from the covering
plastic bag. Turn it upside down and remove the protectors
from the disks, turning the disk softly with your hand (figure 2).
Then grasp handle 1 and upper pipe 4, after removing the
screw. Introduce the pipe into the handle facing the screw
holes and join both parts, tightening the screw with a Phillips
screwdriver (+) as per figure 5.
In the same way, grasp lower pipe 5 and upper pipe with handle
and join both pipes with screw 16 (figure 6). Then place the
assembly on the crutch joining with screw 16 (figure 7). Grasp
cloth bag 10 by its nozzle, introduce it into the back of the
machine, lowering the lock which fixes the nozzle to the machine
and push until it engages (figure 8). Now raise the bag by its
closure 11 and engage the bag spring 12 to the cord holding
hook 3 affixed to upper pipe (figure 9). Finally, remove the
straps which hold together cord 8. Your machine is now ready
to work.

1

Floor Polisher - Model VS12

1. Handle

2. Handle screw

12. Bag spring

11. Bag closure

10. Dust collecting bag

3. Cord

holding hook

4. Upper pipe 1

5. Lower pipe 1

15. Light screen glass

7. Motor unit

16. Pipe-crutch screw

9. Bag nozzle

8. Power cord

6. Crutch

CHARACTERISTICS

Model:

VS12 chrome plated, with light

- Motor average working speed

7500 rpm

- Light bulb

10 Watt, 12 Volt

- External dimensions:

Height

965 mm (38 inch)

Depth

360 mm (14 inch)

Length

400 mm (16 inch)

Weight

7.5 kg  (16.5 lbs)

2

Floor Polisher - Model VS12

Desengage

Fig.7

18. Caster

Engage

Protector

Fig.2

Fig.5

Fig.6

Fig.9

Fig.8

Insert

Remove

Nozzle

lock

Reviews: