vaxcommercial.co.uk
4
assembly
3. Assembly
Attach upper handle
Remove clean solution tank (upper tank) (Fig.3/1).
With cord hook to back of carpet cleaning machine, push
upper handle down onto lower handle (Fig.3/2).
Attach hose holder
Position hose holder onto handle by matching tabs on rack
with openings on back of handle.
Make sure bolts are through holes (Fig.3/3).
Place nuts in recessed areas on back of hose holder. Hold
each nut in place while tightening each bolt securely (from
the front of the handle) with a Phillips screwdriver. Only
two nuts are needed on this model. The extra nut is not
required but has been provided for your convenience
(Fig3/4).
When handle sections are completely together, squeeze
trigger and depress Clean Surge button on upper
handle.You will hear a “snap” when the trigger rod is in
place (Fig.3/5).
Attach tool holder
Remove tool and taped screw from holder. Insert
projections on holder into slots on back of cleaner.
(Fig.3/6).
Slide holder down into place. Insert screw at (A) and
tighten with a Phillips screwdriver (Fig.3/7).
Fig.3/1
Fig.3/4
Fig.3/5
Fig.3/2
Cord hook
Fig.3/6
Fig.3/7
Fig.3/8
Fig.3/3
Squeeze
trigger
Clean Surge
button
VCW-04 Commercial Cleaner User Guide v5.qxd:UG 27/1/09 16:52 Page 4
