Draining the dirty water tank
Cleaning the dirty water tank
Park machine near a sewer drain or suitable location to comply with the national regulations for waste water disposal.
Switch off the machine
and remove the ignition key.
Pull the battery security
connector to disconnect.
Detach the drain hose
from the hook. Holding
hose high, unclip end cap.
Using a hose or similar tool
to rinse dirt and debris in
dirty water tank.
Replace diry water tank
cover, hooking the locking
clip securely into place.
The hood must be
airtight to avoid loss of
pressure and reduction
in drying efficiency.
Lift to remove diry water
tank cover, to clean through
inspection hole.
Re-fit the drain hose end
cap and attach the hose
onto the hook behind
the machine.
Maintenance
Lower the drain hose over
the drain point.
WARNING:
Before carrying out any type of maintenance, remove ignition key and disconnect the machine
battery connector.
!
!
!
!
WARNING:
To disable during operation, pull the battery security connector to disconnect all power to machine.
13
Vax Careline: (UK) 0330 026 4275
NOTE:
• The machine should be emptied and cleaned after each use.
• Do not leave the machine with dirty water in the tank as can cause blockages and potentially create bad odours.