Insert the back panel
into the floorhead
Insert the lower cord
hook into the hole
at the bottom of the
back panel
Now take the small
clip and push it down
between the end of the
cord hook and the
machine, to lock the
cord holder in place
Place the dirt container onto the machine.
Ensure the dirt container tabs line up with
the holes in the post motor filter cover
Assembling your upright
Ensure that the back of
the dirt container connects
to the inlet tube
Place dirt container on
machine and click into
place at the back panel
Insert the short end of the
hose into the tube at the
back of the machine and
turn to lock
Wrap the hose around the
machine and push the
hose end into the hose to
machine connector
Getting started
Using your machine
PLEASE READ ‘LEt’S tALk SAFEtY’ At tHE BEGINNING BEFORE USE
Wrap the power cord around the quick release cord hook
at the top and the lower cord hook, continue wrapping
the power cord until it is secure
Attach TurboTool clip to the
handle. Snap TurboTool
into position*
Inset the handle into the
top of the back panel until
it clicks into place
*Not applicable for all models
