7
Vax Careline
0870 606 1248
dirt container & filter / clearing blockages
Cleaning the Filter
IMPORTANT: An extra central HEPA filter has
been included in the carton packaging.
Vax
recommends replacing the central HEPA filter every
6-12 months.
Remove the dirt container as directed.
Release the filter safety latch located on top of the dirt
container and pull out the central filter (Fig.6/3).
Gently tap the filter against the side of a rubbish bin to
remove excess dirt.
The central filter can be washed in warm water (max
40°C). Allow to air dry completely before replacing.
NOTE: Do NOT use any detergents or boiling water to
wash the filter. Vax recommends washing the filter
every time you empty the dust container.
Return the central filter to the dirt container ensuring the
filter safety catch has been reset.
Replace the dirt container as directed.
Post-motor Filter
NOTE: This is located on the right hand side of the
vacuum cleaner.
Release the post-motor cover and remove the filter by
pressing in the catch on the left hand side.
Replace the post-motor filter every 9-12 months.
Replace the post-motor filter and cover before re-starting
the vacuum cleaner.
7. Clearing Blockages
WARNING: To reduce the risk of electric shock,
the power cord must be disconnected before
performing maintenance or troubleshooting checks.
Turn the vacuum cleaner off and unplug from the electrical
outlet.
The flexible hose, stretch hose (Model:V-091S only) and
X-tend (Model: V-091X only) can be disconnected from the
vacuum cleaner by pushing in the button on the hose and
pulling away from the machine. Remove any blockages
found then re-connect the hose securely.
Removing debris from the TurboTool
(Model: V-091P,
V-091PB, V-091PBA, V-091S, V-091PA V-091FC only)
Switch the vacuum cleaner off and disconnect the power
plug from the electrical outlet.
Rotate the locking ring 180º (Fig.7/1).
Lift the top cover off and remove any blockage (Fig.7/2).
To re-assemble, ensure that the tabs are engage. Pivot the
lower housing closed and rotate the locking ring 180º
(Fig.7/2).
Fig.6/3
LOCKING RING
Fig.7/1
TABS
Fig.7/2
!
!
