5
assembly/ operation
Press in the appropriate release button and pull the tubes
apart with a downward movement to take the extension
tube off again (Fig.3/6).
4. How to operate
WARNING
: The steam cleaner must always be
disconnected from the mains when filling or
topping up with water.
Filling the tank
The steam cleaner has a built-in water tank holding 1.6
litres. Unscrew the tank cap (Fig.4/1) by pressing the cap
down and simultaneously turning it anti-clockwise. Use
the funnel and measuring jug supplied when filling with
water (Fig.4/2).
NOTE
: Only fill with pure water without additives of any
kind, e.g. perfume, cleaning agents, alcohol, as they could
damage the machine and make it dangerous to use.
It is advisable to use limescale deposits if your water is
very hard (over 2.5mmol/l or 21°dH). Otherwise boil the
water first to extend the life of the steam cleaner.
IMPORTANT
: Do not exceed the maximum
quantity of 1.6 litres when filling the tank!
Screw the tank cap firmly back on by turning it clockwise
while pressing down.
NOTE:
The heating up time will be shortened if warm
water is used when filling.
Fig.3/5
Fig.3/6
!
Fig.4/2
Fig.4/1
Release button
Release button
CLICK
Steam trigger
Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308
!
V-081 Series User Guide.qxd:User Guide 22/4/10 17:26 Page 5
All manuals and user guides at all-guides.com
