3
To assemble the handle:
Insert the handle into the body of the unit and
push down firmly until it locks into place. Be sure
to line up the button on the handle with the notch
on the body, to help guide the lower handle into
the body. The pin should be visible in the hole on
the body.
NOTE:
The vacuum may turn on during
handle assembly. To turn the vacuum off, press
the trigger on the handle once.
To disassemble the handle:
Use a ball point
pen to push the button in while pulling the handle
up and out of the body of the cleaner.
Connect the charger to a wall socket.
NOTE:
Charge for 24 hours before first use.
Plug the charger end into the side of the unit.
NOTE:
The indicator light will come on to
indicate that the appliance is charging. Unit
will be charged in 16-24 hours. The light will
not change colour when the unit is charged.
Putting your cleaner together
Charging
NOTE:
Only use the charger supplied.
CHARGE 24 HOURS BEFORE FIRST USE.
Notch
Top view of cleaner
