7
Pre-treating your Carpet / How to Operate
Fig.5/7
To pre-treat your carpet, step on the power on/off pedal
to turn the cleaner on.
Using the wand and the trigger, apply the pre-treatment
solution to your carpets. Turning the spray nozzle
clockwise or anti-clockwise will alter the spray pattern.
Fig.5/8
Fig.5/9
Releasing the trigger will stop the solution flow.
The treated areas should be left for 10 to 15 minutes.
For heavy stains, mild agitation may be used.
Note
: Do not over wet carpets.
Note
: Once your carpets have been pre-treated,
rinse the clean water tank and clean your carpets with
Vax AAA Carpet Cleaner as directed.
6. How to Operate
Grasp clean water tank under handle while pressing
clean water tank latch. Tilt clean water tank away from
cleaner and remove.
Unscrew measuring cap from back side of clean water
tank.
Clean water
tank handle
Clean water
tank latch
Fig.6/1
Fig.6/2
Fig.6/3
Vax V-028 Range.qxd 27/4/07 13:26 Page 7
