www.vax.co.uk
8
operation
To wash upholstery, be sure that the brush switch is OFF
and that the power and soap switches are turned ON
(Fig.4/13).
Note: Do not allow upholstery to become too wet.
While depressing the blue solution spray trigger, push the
attachment in a forward motion. Release the trigger and pull
the attachment backward in the same path to remove dirty
water and solution from upholstery (Fig.4/14).
For heavily soiled areas, repeat if necessary.
NOTE: Make sure upholstery is thoroughly dry before
using.
Remove the hose from the fitting by twisting it
counterclockwise to unlock. Close the hose
attachmentcover until it snaps into place (Fig.4/15).
Disconnect water supply connector from the water
supply port by pressing the grey button and pulling
(Fig.4/16).
Move the tool/floor selector to the floor position
(downwards) (Fig.4/17).
Return tools to their storage position on the back of the
cleaner (Fig.4/18).
Fig.4/13
Fig.4/14
Fig.4/15
Fig.4/16
Fig.4/17
Fig.4/18