Empty the dirt container completely (Fig.6/4).
Each time the dirt container is emptied, the filter should be
cleaned. Tap the filter firmly against the inside of a rubbish
bin until the dirt stops falling from the filter (Fig.6/5).
Return the filter to the dirt container. Push the filter into
place to prevent dirt leakage. Return the dirt container to
the cleaner (Fig.6/6).
7. Rotating Brushbar:
Removal and Replacement
WARNING:
To reduce the risk of injury from moving
parts, unplug the cleaner before changing the belt or
the rotating brushbar.
Tool required:
Phillips screwdriver
NOTE:
Unplug cleaner before changing filter.
NOTE:
For best performance, replace filters annually.
Removing the Belt
Lay the cleaner flat and turn it over to expose the nozzle
base. The base should lay flat and face upwards. To
remove the nozzle guard, use a Phillips screwdriver to
remove the three (3) screws. The arrows show the location
of the screws (Fig.7/1).
Pull and lift off the nozzle guard (Fig.7/2).
Lift and remove the brushbar. Dispose of the old belt
(Fig.7/3).
9
Vax Careline
0870 606 1248
rotating brushbar removal and replacement
Fig.6/5
Fig.6/6
Fig.7/1
Fig.7/2
Fig.6/4
!
Vax V-041P User Guide.qxd 16/4/07 14:27 Page 9