Cleaning the Filters
Cyclonic Filter Assembly
IMPORTANT: Disconnect cleaner from electrical
outlet. Do not operate cleaner without dirt cup
or filters in place.
Remove dirt cup as previously described (Fig.6/2).
Twist filter assembly (A) counterclockwise.
Remove assembly from dirt cup (Fig.6/6).
Dirt and debris can be cleaned from the filter assembly
by brushing with the cleaner’s combination tool.
Place the filter assembly on the dirt cup, aligning (3) tabs
(A) on filter with (3) slots on dirt cup (B) and twist it
clockwise to secure into position.
Press dirt cup door release button (C) to latch dirt cup
door closed (Fig.6/7).
Replace dirt cup as described in Figs.6/4 and 6/5.
Secondary Filter
IMPORTANT: Disconnect cleaner from electrical
outlet. Do not operate cleaner without dirt cup
or filters in place.
Remove dirt cup as previously described (Fig.6/2).
With thumb and forefinger, slide latch (A) located at the
top of the housing to the right and pull down to remove
gray filter frame.
9
Vax Careline
0844 412 8455
maintenance
Remove black foam filter. Rinse filter frame cartridge and
foam filter under cold water (Fig.6/8).
Allow both filter frame and filter to air dry for 24 hours
before replacing filter into filter frame.
Reposition filter frame cartridge by inserting tabs into
slots on back of housing.
Rotate filter cartridge frame up toward top of housing
and snap closed.
HEPA Final Filter
IMPORTANT: Disconnect cleaner from electrical
outlet. Do not operate cleaner without dirt cup
or filters in place.
With fingers in slots, pull filter frame (A) straight out
(Fig.6/9).
Dirt and debris can be cleaned from the filter cartridge
by brushing with the cleaner’s combination tool,
IMPORTANT: Do not rinse or wash the HEPA
filter cartridge.
Fig.6/9
A
Fig.6/6
B
C
A
A
Fig.6/7
!
A
!
!
!
Fig.6/8
U90-M7 Series User Guide.qxd:UG
16/9/09
15:37 Page 9
