Using your machine
Taking care of your machine
Remove hose.
Remove extension tube.
Attach required tool to the hose.
Attach hose to
extension tube.
Attach accessory to
extension tube.
IMPORTANT:
Hold vacuum
cleaner when using hose
or extension tube for above
floor cleaning.
Hose
Extension tube
Always switch off and unplug
the vacuum cleaner from
the electrical socket before
assembling, opening or emptying
the dirt container, or before
connecting/disconnecting
the attachments.
WARNING
Emptying and cleaning the dirt container
Press dirt container
release button to remove
the dirt container.
Hold dirt container over a bin
and press dirt release button to
open, allowing dirt to fall out.
Unclip the dirt container lid
to open.
Lift lid to access
inner cyclones.
Tap
Lift out the inner cyclones.
Hold cyclones/separator over
bin and tap to remove dirt
and debris.
Before you begin cleaning
WARNING:
Always switch off and unplug the vacuum cleaner before connecting or disconnecting the hose/attachments,
or removing and emptying the dirt container.
WARNING:
Always switch off the brushbar before using any accessories/hose/telescopic extension tube.
IMPORTANT:
The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does
overheat the thermostat will automatically turn the vacuum cleaner off. If this happens, switch the vacuum cleaner off
and unplug from electrical socket. Remove and empty the dirt container also check the vacuum cleaner for blockages.
Allow the vacuum cleaner to cool for approximately 1 hour (if you have cleaned the filters please wait 24 hours for the
filters to fully dry before putting back into the vacuum machine).
IMPORTANT:
For best cleaning results filters require cleaning at least every 3 months.
IMPORTANT:
If the vacuum cleaner is blocked, switch off and unplug before removing the blockage.
TIP
The 2-in-1 tool can be attached to
the tube or directly to the hose.
Switch off the brushbar before
using any accessories/hose/
telescopic extension tube.
