-
Operation
Steam cleaning hard floors
Refreshing carpets
IMPORTANT:
When using on carpets, always ensure the microfibre cleaning pad is properly attached to the
floor head.
IMPORTANT:
To reduce the risk of personal injury, unplug the steam mop when assembling the accessories.
Plug into mains, press on
button on the main body.
A blue light shows unit is
on and heating.
Wait until green light
appears (within 1 minute).
To recline the unit place
foot on floor head and
tilt handle.
To produce steam squeeze
the trigger in short bursts.
To prevent overly wetting
floors, do not hold
down continuously.
Move the steam mop slowly
backwards and forwards
across the floor paying
particular attention to high
traffic areas.
Place unit into
carpet glider.
To recline the unit place
foot on floor head and
tilt handle.
To produce steam squeeze
the trigger in short bursts.
To prevent overly wetting
carpet, do not hold down
continuously.
Move the steam mop slowly
backwards and forwards
across the floor paying
particular attention to high
traffic areas.
6
Vax Careline: (UK) 0844 412 8455
(ROI) 1-800 928 308
WARNING:
Never leave the stick steam mop in one spot on any surface for an extended period of time with a damp or
wet microfibre cleaning pad attached as this may damage the floor surface. Your stick steam mop should only be used
on tiles, lino, sealed wood flooring including sealed laminate.
WARNING:
Do not operate/use stick steam mop without water in clean water tank.
IMPORTANT:
For 1 x 400ml water tank = 12 minutes steaming time (approx).
WARNING:
Please refer to the manufacturers care recommendations before use and test the steam mop on a
discrete area of flooring to begin with.
IMPORTANT:
Please refer to floor manufacturer’s care recommendations before use and test the steam mop on
a discrete area of flooring to begin with.
