Vax Service line:
AU: 1300 361 505
NZ: 0800 800 900
vax.com.au
9
Maintenance
(Keep your Vax as good as new)
Battery Pack Removal & Replacement
At the end of the product’s or battery’s life the battery should be removed for disposal and recycling.
Only a technically competent person should undertake battery removal and replacement.
Follow these steps for battery removal or replacement:
1. Switch off the sweeper and ensure the Charger is disconnected.
2. Remove the Tubes and Dust Tray.
3. Turn the unit over, being careful not to switch the product on.
4. Press the clip to release the Battery Cover.
5. Carefully lift the battery out.
6. Slide the plastic cover off the black (-) cable connector.
7. Push the latch on the connector and pull the connector off the battery contact.
8. Repeat for the red (+) cable connector.
9. Push the cable connectors onto the new battery contacts, ensuring they are securely fi tted.
10. Slide the plastic covers back over the connectors.
11. Replace the battery into the compartment and refi t the battery cover.
Underside of Sweeper
Battery Connector
Battery Cover
Clip
Cable
Connector
NOTE:
If uncertain as to how to replace your battery pack, we suggest you take your unit to a
Vax authorised service agent to have this service performed. To fi nd the location of your closest
Vax repair agent go to vax.com.au or call AU 1300 361 505 / NZ 0800 800 900
