6
7
2
3
4
Tool storage
Slide the tool caddy downwards
until it is secured in place.
Note
: The tool caddy can be
removed for storage on a wall.
Connect upholstery attachment to
end of hose by pressing until it
clicks into place.
Push upholstery attachment into
the left hose clip, wrap the hose
around the tool caddy starting on
the back groove of the storage
caddy.
Secure into place by pushing the
end of the hose into the hose clip
on the right. Press the solution/
hose clip onto the hose to secure
the solution tube in place (4a).
1
2
3
Pre-treating your carpets
with the pre-treatment wand
and solution
Remove the clean water tank by
pressing the clean water tank
release and pulling the tank by the
handle. Put to one side to fill later.
While the clean water tank is
removed, loosen the solution tank
by gently pushing out the solution
plug from the plug opening.
Note
: The solution tank can be
filled while it is attached to the
cleaner but you should use care
when refilling.
Remove the solution tank by pulling
up and out.
Note
: After spraying rinse the
machine and pre-treatment wand
with clean water. Wash the carpet
as described in this guide, using
VAX AAA carpet cleaner.
4a
V-027M User Guide 7/9/06 15:00 Page 3
