Never use the turbo nozzle on cars,
tyres and engines.
WARNING
To attach the jet nozzle,
fit the lance with a firm
push and twist to lock
into place.
The jet nozzle has a wider spray and is ideal for use on surfaces areas such as cars, garden furniture,
decking and boats.
To attach the turbo
nozzle, fit the lance with
a firm push and twist to
lock into place.
Using your accessories
The turbo nozzle has a more concentrated spray and is ideal for use on very dirty surfaces, patios or masonry.
As it is not fitted with a pressure regulator it is not suitable for use on delicate or painted surfaces.
Using your machine
Hold down the release button on the
lance, push the jet nozzle and lance
firmly together until you hear an
audible CLICK. Release the button and
gently pull the jet nozzle to make sure it
is locked secure before use.
Hold down the release button on the
lance, push the turbo nozzle and lance
firmly together until you hear an audible
CLICK. Release the button and gently pull
the turbo nozzle to make sure it is locked
securely before use.
Squeeze the trigger on the
trigger handle to release
a high pressured water jet,
and start cleaning.
IMPORTANT: Always make sure the machine is switched off and the safety button on the trigger handle
is LOCKED before connecting/disconnecting the lance, nozzle or accessories.
Make sure water supply
is not connected. Firmly
push the water hose pipe
with suitable connector
onto the water inlet to
lock into position.
Connect water hose pipe to
a suitable water supply and
turn water on.
Before plugging the
machine in, press the
unlock safety button
on the trigger handle
and squeeze the trigger
until water starts to flow
through the nozzle.
IMPORTANT: Always use an RCD adaptor when using this pressure washer.
WARNING: Don’t leave the pressure washer running when not in use, or for more than 5 minutes to prevent overheating.
Before switching the pressure washer on, the trigger handle must be squeezed to release water and any airlocks in the
machine or pressure hose. Always release any pressure build up in the handle prior to disconnecting the hose.
Connect the power cord
to the mains supply via
an RCD adaptor.
Push the ‘I’ switch to turn on.
The machine will run for a
few seconds then stop but no
water will be released.
Squeeze the trigger on the trigger
handle to release a high pressured
water jet, and start cleaning.
Don’t aim the pressure washer
directly at people, animals, plants,
electrical components, wires or the
pressure washer itself.
WARNING
Push ‘O’ switch to turn off.
Using your machine
Squeeze the trigger on the trigger handle to release a high
pressured water jet, and start cleaning.
Summary of Contents for PowerWash VPW4
Page 10: ...Notes Notes...