Vax POWERHEAT ACH2V101, Let'S Get Started

Page: 9 / 16

Using the 24hr timer
CAUTION:
Always take extra precaution when leaving the appliance on for extended periods of time and unattended.
IMPORTANT : The Timer function switches the appliance off after a set number of hours. If this is not selected
and the appliance is not switched off it will operate continuously. For convenience the appliance is assembled
with the timer in the On mode and all pins moved to the On position.
The mode can be selected
by moving the slider to one
of the 3 positions.
Each red pin represents a 15 minute timing cycle.
There are up to 96 separate On/Off combinations.
To activate, the pins should be pushed outwards.
Deactivated pins should be pushed inwards.
Setting the time:
Rotate the dial clockwise
to set to the current
time in 24hr mode.
The current time should
be positioned against
the triangular symbol.
Example: To use the timer to turn
the radiator on between 6:00am
and 8:00am and slide the 8 pins
outwards as shown.
On – switches the appliance on regardless
of timer settings and positions.
Timer – Operates the appliance by the users
pre programmed timer settings.
Off – switches the appliance off regardless
of timer settings and positions.
TIP
Use an implement such as a pen nib to help slide each of the pins.
The timer has 3 modes
for operation
Activated pins should be
pushed outwards.
Deactivated pins should
be pushed inwards.
Using your appliance