4
assembly
3. How to Assemble
IMPORTANT: Always unplug the vacuum cleaner
from the electrical outlet before assembling or
removing the accessories.
Tool required:
Crosshead screwdriver
1.
Push back panel onto base of unit. Insert hose storage
hook and secure in place with two screws provided
(Fig.3/1).
2.
Place the handle onto the back panel and push down
firmly (Fig.3/2).
3.
Insert the lock pin into the hole located at the bottom of
the handle, and secure into place with the small screw
provided (Fig.3/3).
4.
Attach hose onto cleaner (Fig. 3/4) and place the dirt
container onto the unit.
5.
Store the TurboTool in the caddy on the handle
(Fig.3/5).
!
Crosshead screwdriver required
Fig.3/1
Fig.3/2
Fig.3/3
Fig.3/5
Fig.3/4
Back of
unit
vax.co.uk
(Some models only)
Vax U90-P4 Series User Guide v1.4.qxd:UG 5/7/11 11:48 Page 4
