3
damage to the machine. Remove blockages only as instructed in this guide.
• Don’t use the machine with incorrect voltage as this may result in damage or
injury to the user. The correct voltage is listed on the ratings label.
• Don't over saturate your flooring. Always finish on a dry stroke.
• Don’t use on a surface that is damaged, uneven or incorrectly fitted.
DO'S
• Check with the manufacturer of your flooring prior to using the machine.
• The clean water tank should be filled with warm water (max 40°C) only.
Filling the clean water tank with hot or boiling water will damage the machine
and invalidate the guarantee.
• Always vacuum your flooring thoroughly before using the machine.
• Test all carpets/rugs/upholstery before full usage. Run the machine over a small
hidden area. If no damage or pile distortion occurs continue cleaning.
• Always replace the fuse in the plug with a British 13amp fuse.
• Always unplug the machine before carrying out any maintenance and before
connecting or disconnecting the hose/accessories.
• Always check the machine, tools and accessories are free from damage,
dirt/debris before using.
• Take extra care when cleaning on the stairs.
• Always protect the power cord from heated surfaces or near open flames.
• Turn off all controls on the machine before disconnecting or connecting the
power cord. After use always wrap the power cord around the cord clips
provided.
• Always keep the power cord away from the brushes whilst using the machine.
• Use only CE approved 13amp extension cords, non-approved extension cords
may overheat. Care should be taken to arrange the extension cord as it can be
a trip hazard.
• Always use the machine with all water tanks and filters in place.
• Keep all openings clear and free from debris as this may affect the airflow/
suction/water pick up.
• Always use the machine in an upright position. To prevent motor damage from
dirty water, never hold the machine upside down or on its side.
• Store the machine in a cool, dry area. Before storing the machine please ensure
all water/solutions tanks are empty and filters are thoroughly clean and dry.
