background image

Thank you for buying this Platinum PowerMax.

Taking care of your carpets

The Platinum PowerMax is designed to make washing carpets regularly, as effective and efficient 

as possible and this user guide will help you get the most out of your machine. 
Maintaining your carpets will ensure they keep their appearance for longer and smell fresh and 

clean. You’ve chosen carpets for your home for a reason and VAX will help you take good care  

of them. 

Taking care of your Platinum PowerMax

Also inside this guide are instructions on maintaining your new machine, so that it’s always ready 

when you are to tackle your carpets.

Receive your FREE 6 year guarantee

Register your product online:

vax.co.uk/registration

We’re here if you need us

Visit our online support:

support.vax.co.uk

Still need to get in touch?
Our UK based Customer Care Team are here to support you. 

For help with assembly, operational or performance problems, or buying and fitting new accessories, you can 

find all our contact details at 

vax.co.uk/contact

This user guide can be found online at: 

support.vax.co.uk

† 

Registration required. Terms and conditions apply, see vax.co.uk for details.

GETTING IN TOUCH

6

Summary of Contents for Platinum PowerMax





















Reviews: