manualshive.com logo in svg

Vax ONE PWR CORDLESS BLADE 4 CLSV-B4BS, User Manual

Share
Download
Vax ONE PWR CORDLESS BLADE 4 CLSV-B4BS User Manual Download Page 7

7

support.vax.co.uk

GETTING STARTED

CHARGING THE BATTERY

Slide the battery down on to the charger.

The charger light will flash white to 

show when the battery is charging. 

The light on the charger will stop 

flashing and go off when the battery 

is fully charged.

Once fully charged, slide the battery off 

the charger to remove.

To check the battery charge 

level press the battery symbol.

THIS MACHINE IS ONLY TO BE USED WITH VAX ONEPWR BATTERIES AND CHARGER.  

PLEASE READ THE SAFETY GUIDE BEFORE USE.

NOTE: Before first use, ensure the battery is fully charged. Failure to fully charge the battery 

before first use may result in poor battery performance. The life expectancy of the battery will vary 

depending on the usage of the machine.

OPERATION

Place your foot on the powered head.

Pull the handle backwards to recline.

Slide the battery into the handheld until 

it clicks into place.

WARNING: The brushbar in the powered head constantly rotates when switched on. Never use the 

powered head on one spot for an extended period of time as the brushbar may damage the floor 

surface. Always turn the powered head brushbar off when cleaning hard floors. To prevent any 

damage being sustained, test on an inconspicuous area of the flooring first.

Summary of Contents for ONE PWR CORDLESS BLADE 4 CLSV-B4BS














Reviews:

No comments

Brands by name

Popular brands

Load more brands