Taking care of your machine
!
40˚C
MAX
24hr
Cleaning the pre-motor filter
Twist the dirt container
lid anti-clockwise and
lift to remove.
Tap the filter over a
bin to remove any dirt
and debris.
Lift out the pre-motor filter.
Rinse the filter under water
(40°C Max). Leave to dry
for 24 hours before placing
back in the machine.
Post-motor filter maintenance
Post-motor filter is located
in the right side wheel.
Hold the centre of the
wheel and twist wheel
cover anti-clockwise.
Check the post-motor
filter for discolouration.
With the wheel cover off
the post-motor filter is
easily removed.
Clean the pre-motor
filter every time the dirt
container is emptied and
replace the post-motor
filter every 12 months.
!
40˚C
MAX
24hr
IMPORTANT:
The exhaust filter is designed to offer long life with no maintenance. The filter should be checked
periodically and when heavily discoloured it should be replaced. Please do not wash, scrub or brush the filter as
this will damage the delicate filter media.
TIP
Cable rewind button is
located at the rear of the
machine. After unplugging
press the cable rewind until
the cord is fully retracted.
For convenience there is a parking slot located
at the rear of the vacuum cleaner where the
floorhead and tubes can be attached for storage
and carrying.
Storing your machine
Summary of Contents for MACH PET
Page 1: ...vax co uk C85 MQ Pe Mach Pet Let s get started ...
Page 13: ...Notes ...
