www.vax.co.uk
4
assembly / charging
3. How to Assemble
Line up nozzle with main body and firmly push nozzle onto
body of unit until nozzle locks into place (Fig.3/1).
NOTE: To remove, push release button and pull the
nozzle away from the body of the unit.
Slide upper handle onto post on main body (Fig.3/2).
NOTE: if unit turns on when assembling handle to unit,
toggle power button & continue assembly.
Fasten three (3) screws to secure the upper handle to the
main body (Fig.3/3).
4. Charging
NOTE: Use only the charger supplied by the
manufacturer to recharge.
CHARGE 24 HOURS BEFORE FIRST USE. For best
results, return the Stick Vac to the charging base after
every use.
Connect wall charger to the outlet (Fig.4/1).
Place Stick Vac on the charger base. The indicator light will
come on to indicate that the Stick Vac is charging. Unit will
be charged in 16- 24 hours. The light will not change
colour or shut off when the unit is fully charged (Fig.4/2).
NOTE: The power button must be in the off position
for the Stick Vac to charge.
Fig.3/1
ASSEMBLY
Fig.3/2
Fasten three (3)
secure the upper
Fig.3/3
Nozzle
release
button
Fig.4/1
Fig.4/2
Vax K-020 User Guide.qxd 30/8/07 16:42 Page 4