background image

Thank you for buying this Impact 302. 

Taking care of your carpets and hard floors

The Impact 302 is designed to make vacuuming carpets and hard floors regularly, as effective 

and efficient as possible and this user guide will help you get the most out of your machine. 
Maintaining your carpets and hard floors will ensure they keep their appearance for longer.  

You’ve chosen carpets and hard floors for your home for a reason and Vax will help you take 

good care of them. 

Taking care of your Impact 302

Also inside this guide are instructions on maintaining your new machine, so that it’s always  

ready when you are to tackle your carpets and hard floors. 

Taking care of you

We’re here if you need us. Instead of taking me back  

to the shop, simply visit:

vax.co.uk/support

 

or call:  

(UK)

 

0844 412 8455

 

(ROI) 1-800 928 308

Monday-Friday 8.30am to 6.30pm, Saturday 9.00am to 5.00pm

Calls are charged at the UK local rate. Please make a note of the serial number and model number  

of the product before calling. 

Alternatively, you can write to us at:

Vax Ltd., Kingswood Road, Hampton Lovett, Droitwich, Worcestershire, WR9 0QH, UK

Let us know what you think 

@VaxUK

Summary of Contents for Impact 302 C86-ID-Be

















Reviews: