Remove any packaging from the
nozzle and ensure latches are
out, insert nozzle into middle
section of the base
While holding nozzle in
place, slide latches inward
to lock it into position
Before you begin cleaning
IMPORTANT:
Only use Vax hard floors cleaning solution. Using other solutions may cause excess foaming.
Excessive foam will prevent the machine from working effectively. Using other solutions will invalidate the guarantee.
Getting started
Using your machine
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Raise handle to upright
position until it locks
into place
To lower handle, press
handle release button
and fold handle to
storage position
To install brushes rest the machine on the
floor. Align the post on the spin brushes
with the square hole
Push brushes firmly at
both ends until it locks
into place
Lock tank cap into place to
prevent leaking
Slide tank into machine until
latch snaps into position
To remove the clean water
tank, squeeze release button
and pull tank straight out
Twist tank cap counter
clockwise and lift to remove
Using the tank cap as
a measuring cup, pour
the required amount of
solution (approx. 60ml per
1 litre of water)
Pour cleaning solution
into tank. Top up tank to
fill line with warm water
(Max 40°C)
Filling the clean water tank
Always switch the
machine off and unplug
before carrying out any
maintenance.
WARNING
Please remove any large objects or debris prior to using your Floormate Trio.
