background image

2

7

1. Safety Instructions

For Household Use Only

When using the vacuum cleaner, basic safety 

precautions  should  always  be  observed, 

including the following:
1.  Only use the vacuum cleaner indoors on 

dry surfaces.

2.  Turn  off  the  vacuum  cleaner  controls 

before connecting or disconnecting from 

the mains supply.

3.  Always unplug the vacuum cleaner before 

connecting or disconnecting the vacuum 

hose and accessories.

4.  This  appliance  is  not  intended  for  use 

by  young  or  infirm  persons  unless  they 

have  been  adequately  supervised  by  a 

responsible  person  to  ensure  that  they 

can use the appliance safely.

 

Young  children  should  be  supervised 

to ensure that they do not play with the 

appliance.

5.  Use only as described in this manual.

 

Use only the manufacturer’s recommended 

attachments.

6.  Do  not  use  the  vacuum  cleaner  if  it  has 

been  dropped,  damaged,  left  outdoors 

or  dropped  into  water.  Do  not  use  the 

vacuum  cleaner  with  a  damaged  cord 

or  plug.  If  the  supply  cord  or  plug  is 

damaged,  return  the  vacuum  cleaner 

to  an  Authorised  Vax  Service  Agent  for 

examination, repair or adjustment.

7.  Do not pull or carry by the cord. Do not 

use  the  cord  as  a  handle,  close  a  door 

on the cord or pull the cord around sharp 

edges or corners. Do not run the vacuum 

cleaner  over  the  cord.  Keep  the  cord 

away from heated surfaces.

8.  Do not handle the plug or vacuum cleaner 

with wet hands. Do not use outdoors or 

on wet surfaces.

9.  Do not put any objects into openings. Do 

not  use  with  any  openings  blocked  and 

do not restrict air flow. Keep all openings 

free of dust, lint, hair or anything that may 

reduce airflow.

10. Keep  hair,  loose  clothing,  fingers  and  all 

parts  of  the  body  away  from  openings 

and moving parts.

11. Do not pick up hot coals, cigarette butts, 

matches or any hot, smoking or burning 

objects.

12. Do not pick up flammable or combustible 

materials  (lighter  fluid,  petrol,  kerosene, 

etc)  or  use  in  the  presence  of  explosive 

liquids or vapours.

13. Do  not  vacuum  up  harmful  or  toxic 

material (chlorine bleach, ammonia, drain 

cleaner, etc).

14. Do not vacuum up hard or sharp objects 

such as glass, nails, screws, coins, etc.

15. Do not use without the filters in place.

16. Take extra care when vacuuming stairs.

17. Keep vacuuming area well lit.

18. Store  the  vacuum  cleaner  indoors  in  a 

cool, dry area.

19. Turn  off  the  on/off  switch  before 

unplugging the vacuum cleaner.

WARNING:

  Always  switch  off  and  unplug 

the vacuum cleaner from the electrical outlet 

before  assembling,  opening  or  emptying 

the  dirt  container,  or  before  connecting/

disconnecting the attachments.

CAUTION:

 The vacuum cleaner is a very

powerful unit. Before plugging the cord into

the electrical outlet, make sure the switch is in 

the ‘off’ position.

IMPORTANT:

 If the inlet, hose or telescopic 

tube  is  blocked,  switch  off  the  vacuum 

cleaner  and  remove  the  blockage(s)  before 

re-starting.

IMPORTANT:

  Cleaning  filters  improves 

vacuum performance. Make sure all washable 

filters are completely dry before inserting back 

into the vacuum cleaner.

This vacuum cleaner is intended for household 

use only and not for commercial or industrial 

use.

Motor Thermostat

IMPORTANT:

 The motor is equipped with a 

thermal cut-out. If for any reason, the vacuum 

cleaner should over-heat, the thermostat will 

automatically  turn  the  unit  off.  Should  this 

occur,  unplug  the  vacuum  cleaner  from  the 

electrical outlet and turn off the switch.

Remove the dirt container and empty. Clean 

or  replace  the  filters.  Allow  the  cleaner  to 

cool for approximately one (1) hour before re-

starting.

9. VAXCARE Service & Help:

AUSTRALIA 1300 36 4040

NEW ZEALAND 0800 800 900

If  you  have  any  queries  or  concerns  about 

using your Vax, call VAXCARE. Please make a 

note of the serial number and model number 

of the appliance before calling. 

(Aust only: Mon-Fri. 10.00am to 6.00pm. EST)

Calls are charged at the local rate.

An  answerphone  is  available  outside  of 

these hours. We will return your call the next 

working day. 

There are over 300 approved Vax Service Agents 

in Australia and New Zealand. For the nearest 

Service Agent, please refer to your Vax warranty 

or call VAXCARE or visit www.vax.com.au

Technical Specification

Voltage: 

220-240V~50Hz 

Wattage: 

2000W

Capacity: 

2 litres

Filters: 

Dirt Container - Washable

 

Pre-motor - Washable

 

Post-motor - Washable

Cord length:  6.0m

Weight: 

6.7kg

Part No.: 

23000

Subject to technical change without notice.

10. Troubleshooting

WARNING: 

To  reduce  the  risk  of  personal 

injury,  unplug  the  vacuum  cleaner  before 

performing  maintenance  or  troubleshooting 

checks.

PROBLEM: Vacuum cleaner won’t run

Cause:

 Not properly plugged into electrical 

outlet.

Solution:

 Plug in securely.

Cause:

 No electricity in the electrical outlet.

Solution:

 Check fuse or breaker.

Cause:

 On/off switch not turned on.

Solution:

 Push on/off switch to ‘on’.

Cause:

 Motor thermostat has tripped.

Solution:

 Switch off and unplug the vacuum 

cleaner. Leave for one (1) hour before switching 
the vacuum cleaner back on.

Cause:

 Blown fuse/tripped breaker.

Solution:

 Reset circuit breaker or replace fuse.

PROBLEM: Cleaner won’t pick up/

loss of suction

Cause:

 Dirt container not installed properly.

Solution:

 Review dirt container replacement.

Cause:

 Dirt container full or blocked.

Solution:

 Empty dirt container.

Cause:

 Clogged filters.

Solution:

 Remove, clean and replace filters.

PROBLEM: Accessories won’t pick up

Cause:

 Accessories are not attached correctly.

Solution:

 Refer to section 5.

Cause:

 Hose is not installed correctly.

Solution:

 Refer to section 3.

PROBLEM: Dust escaping from the 

vacuum cleaner

Cause:

 Dirt container full.

Solution:

 Empty dirt container.

Cause:

 Dirt container not installed correctly.

Solution:

 Review dirt container replacement.

Cause:

 Hose is not installed correctly.

Solution:

 Review installation.

Cause:

 Filter not installed completely.

Solution:

 Remove, clean and replace filters.

Summary of Contents for Force2

Page 1: ...e 08 9247 8100 Facsimile 08 9247 8192 VAX APPLIANCES NEW ZEALAND 27 Clemow Drive Mt Wellington Auckland Telephone 09 5736220 Facsimile 09 5736224 Email vaxnz vax co nz AUST NZ BRANCHES Please register your warranty Send in your completed Warranty Card If you require further assistance or advice about any VAX please call VAXCARE on 1300 36 4040 Australia cost of a local call and 0800 800 900 NZ VAX...

Page 2: ...d remove the blockage s before re starting IMPORTANT Cleaning filters improves vacuum performance Make sure all washable filters are completely dry before inserting back into the vacuum cleaner This vacuum cleaner is intended for household use only and not for commercial or industrial use Motor Thermostat IMPORTANT The motor is equipped with a thermal cut out If for any reason the vacuum cleaner s...

Page 3: ...f the cover Fig 7 5 The HEPA pre motor filter foam filter and frame may be rinsed in luke warm water max 40 C Allow to thoroughly air dry before replacing Fig 7 4 Return the pre motor and foam filter to the unit before replacing the dirt container The post motor filter can be removed from the unit and may be rinsed in luke warm water max 40 C Allow to thoroughly air dry before replacing Fig 7 6 Re...

Page 4: ... vacuum cleaner to start Press the button again to turn the vacuum cleaner off Carpet Cleaning For carpet and rug cleaning press the rocker switch on the combination floor head to raise the brushes Hard floor cleaning For hard floor cleaning press the rocker switch on the combination floor head to lower the brushes Cord Rewind To rewind the power cord press the cord rewind button and guide the pow...

Reviews: