Vax Floormate Edge HF86-FM-E Let'S Get Started Download Page 10

•   Check the fuse in the plug. Always replace the fuse in the 

plug with a British 13amp fuse.

•   Empty recovery tank, remove any debris from filter.  

If washing filter allow 24 hours to fully dry before refitting. 

•  The recovery tank has an automatic shut off to prevent the 

tank from overflowing. If this is activated, the machine will 

not pick up and the sound of the motor will change.  

The recovery tank will need to be emptied.

•     Make sure the recovery tank is locked into place

•     Nozzle may not be locked into position

•   Mode selector switch is set to PICK UP, change to WASH.

•   Check the brushes for blockages and clear.

•   Clean water tank may not be locked in position.

       

 

•   Clean water tank may be empty and need to be refilled.

      

•   Mode selector switch is set to 

Dry mode

, change to 

WASH

•   Check the spinscrub brushes for blockages and clear 

Detergent

Problem

Warning:

 Always unplug the Floormate before performing maintenance/troubleshooting checks.

What to do if it goes wrong

Getting in touch

Why won’t my  

Floormate switch on?

Why won’t my  

Floormate pick up?

Why won’t the water/

detergent dispense? 

Why won’t the brushes 

spin?

Summary of Contents for Floormate Edge HF86-FM-E















Reviews: