Using your machine
Using your machine
Turning your machine On and Off
Slide the power switch to the ON position.
When completed, slide the power switch to the
OFF position.
NOTE:
Empty and clean the unit and filter after
each use or after large pickups when the unit
becomes full.
TIP:
The power switch must be in the OFF
position for the unit to charge.
PUSH
FLIP
Quick-flip crevice tool
Flip crevice tool out to line up with nozzle then
push in until secured in place.
To store crevice tool: gently pull the tool away from
the dust cup and flip the tool up towards the unit
& press down until you feel it lock into place.
PULL
FLIP
Charging
Power switch must be in the OFF position.
The charge indicator light will pulse when
charging and the indicator will turn off when
charging is complete.
NOTE:
Use only the charger supplied by the manufacturer to recharge.
TIP:
For a better experience, fully charge the unit before first use.
NOTE:
The charge indicator will only turn
on while charging. Once the battery is fully
charged, the indicator will not go on again. The
charger will be warm while charging.
TIP:
The unit will charge only for as long as
needed. It may take up to 6 hours for full charge.
NOTE:
The unit can only charge when the
switch is in the OFF position.
NOTE:
If the unit is running and the charger
plug is connected to the unit, the unit will shut
off to prevent damage to the charger or unit.