manualshive.com logo in svg

Vax EVOLVE CLSV-LXBS, User Manual, Page: 11 / 14

Share
Download
Vax EVOLVE CLSV-LXBS User Manual Download Page 11

9

CLEANING & MAINTENANCE

REMOVING AND CLEANING THE BRUSHBAR

Lie the machine on its back.

To remove any threads or hair, slide the 

blade of a pair of scissors into the groove 

on the brushbar and cut along the groove.

Clear any dirt/debris from the end caps 

and inside the housing of the floorhead.

WARNING: Always remove the battery before carrying out any maintenance or troubleshooting.

CAUTION: If the brushbar has been obstructed, the brushbar motor protection sensor may activate 

and the brushbar will stop. To reset clear any obstruction and wait 1 minute before switching the 

machine on. For best performance and to reduce hair/dirt build up, remove and clean the brushbars 

every 1-2 months (depending on the level of use).

Pull the brushbar out from the housing.

Align the arrow on the brushbar cover to the unlock symbol. Push firmly and twist the tab clockwise so the arrow is pointing to the lock symbol. 

Turn the tab on the brushbar cover 

anticlockwise to release the brushbar.

Refit the brushbar into the floorhead.

Summary of Contents for EVOLVE CLSV-LXBS















Reviews:

No comments