Vax
V-015
6
dirt container and filter removal and replacement
Remove the lid of the dirt container (see Fig.4/3).
Firmly tap clean the HEPA filter (see Fig.4/4) until no more
dust is observed falling out.
WARNING:
Always empty dirt container and clean
HEPA filter before each use and during prolonged
usage to avoid motor damage.
Cleaning the pre-motor filter
Behind the dirt container, just under the carry handle is a
pre-motor filter in the form of a small rectangle shaped
piece of foam. This can be cleaned in the same way as the
HEPA filter and can also be had washed under the cold tap.
PLEASE NOTE:
Let the filter dry out side the
vacuum for 24 hours before replacing / re-using.
The dirt container can be washed in lukewarm water (max
40°C). Do not use strong detergents and ensure dirt
container is fully dry before putting back in vacuum
cleaner.
Fig.4/4
!
!
Fig.4/3
Vax VEU-01_02 User Guide.qxd 16/4/07 13:46 Page 6
