Getting to know your machine
Getting started
Assembling your 2-in-1 vacuum cleaner
Line up floorhead with
main body, push firmly
into place.
Line up handle with main
body and lower into place.
Insert screw into back of the
handle and tighten with a
cross head screwdriver until
handle is secured into place.
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Name
Dynamo Power 21.6V
Model No
H85-DP-B21
Battery voltage
21.6V
Run time
45 minutes
*
Charge time
5 hours
Weight
3.25kg
Dust bin capacity
0.5l
Name
Dynamo Power 25.2V
Model No
H85-DP-B25
Battery voltage
25.2V
Run time
55 minutes
*
Charge time
5 hours
Weight
3.29kg
Dust bin capacity
0.5l
Technical Specification
Subject to technical change without notice.
*
Low speed setting on hard floors. Images are illustrative only.
Pre-motor filter (Type 132)
1-1-135931-00
2-in-1 tool (Type 3)
1-1-135932-00
Accessories & Consumables
To purchase consumables and
accessories, please visit
vax.co.uk
Suction control button
On/Off switch
Handheld release button
Handheld On/Off button
Dirt container
release button
Floorhead release button
Floorhead
Charging your 2-in-1 vacuum cleaner
Plug the charger into the
back of the docking station
and plug into mains.
Slide the vacuum onto the
docking station. The LED
indicator on the handheld
On/Off button will initially
turn green, then illuminate
red to indicate that it is in
place and charging.
Once fully charged (8-10)
hours LED indicator on the
handheld On/Off button will
illuminate green and turn off
to power saving mode.
NOTE:
Charging will be required before first use. Initial charge requires 10 hours.
When the vacuum needs recharging the LED
indicator on the handheld On/Off button will
flash red and the machine will cut out.
Machine charging ports
2-in-1 tool holder
Charging point
