Vax Careline:
AU: 1300 361 505
NZ: 0800 800 900
vax.com.au
vax.co.nz
10
Maintenance
(Keep your Vax as good as new)
Cleaning the brush rollers
WARNING:
Danger of injury caused by brush rollers starting up! Before removing the brush rollers,
turn off the appliance and remove the battery pack.
NOTE:
The procedure for cleaning the wide, front brush roller and the narrow front brush roller is identical.
We will describe the procedure using the wide brush roller as an example.
1. Switch off the appliance.
2. Remove the battery pack.
Put down the appliance so that the
bottom of the brush roller is pointing
up and the brush rollers are visible.
Rotate the release catch of the brush
roller powerfully in the direction.
Guide the brush roller back into
its shaft.
Pull out the brush roller to the side.
After inserting the brush roller,
rotate it until all the bristles can
move freely.
NOTE:
Otherwise the entire front
brush roller would be blocked.
Remove any adhering hair, fluff and
the like by hand or carefully with
scissors.
WARNING:
If you have to use
scissors, ensure that you do
not cut off any bristles or damage the
brush roller in any other way.
If any of the bristles can’t move freely,
lock the release catch of the brush
roller by rotating it in the direction.
NOTE:
If required, repeat this
process to clean the narrow, front
brush roller.
