5
Vax Careline
0844 412 8455
accessories / dirt container and filters
5. Accessories
1.
The accessories can be attached directly to the
handle by removing the telescopic tubes and
pushing in the desired accessory.
2.
The accessories can also be attached to the
telescopic extension tube for extra reach. Remove
the combination floor head and push on the desired
accessory.
2-in1 tool:
Dusting brush: for delicate surfaces
Upholstery tool: for carpet, upholstery and stairs etc.
Crevice tool:
for crevices, corners and cracks, etc.
TurboBrush:
for pet hair, stair and larger carpeted areas
(NOTE: not recommended for hard floors)
TurboTool:
for pet hair, stair and upholstery cleaning
(NOTE: Do not use the TurboTool on suede and leather
surfaces)
Hard floor tool:
for hard floor, parquet and laminate
covering.
6. Dirt Container & Filters:
Removal & Replacement
IMPORTANT:
Vax recommends cleaning the filters
every time the dirt container is emptied for
consistent cleaning performance of your machine.
IMPORTANT:
Always unplug the vacuum cleaner
from the electrical outlet before removing the dirt
container.
IMPORTANT:
Do NOT use the vacuum cleaner
without ALL of the filters in place.
Emptying the dirt container
1.
Press down the handle located on the dirt container,
when the handle is pressed down to the bottom, the
dirt container can be lifted to remove (Fig 6/1).
2.
Hold the dirt container
over a bin and press
the quick release
button as directed to
empty the container.
When all the dirt has
fallen, close the dirt
container flap, a click
will be heard when
closed. Then replace
the dirt container (Fig
6/2).
Cleaning the cyclone separator
Twist and pull the dirt container bin off the cyclonic
separator (Fig 6/3).
!
!
!
Fig.6/1
Fig.6/3
Fig.6/2
C91-M5 & C90-M5 Series User Guide.qxd:User Guide 11/9/09 10:26 Page 5
