Emptying and cleaning the dirt container
TAP
Press dirt container release
button to remove the
dirt container.
Hold dirt container over a bin
and press dirt release button to
open, allowing dirt to fall out.
To remove the inner shroud,
hold the container and rotate the
shroud clockwise.
Hold the container and turn the
inner separator anti-clockwise.
Dislodge any excess dirt by
gently tapping the inner separator
over the bin.
WARNING:
Always switch off and unplug the vacuum cleaner from the electrical socket before assembling, opening or emptying
the dirt container, or before connecting/disconnecting the attachments.
IMPORTANT:
Filters need to be cleaned
every time you empty the dirt container.
Do not use your vacuum cleaner without all
of the filters in place.
IMPORTANT:
The motor is equipped with a thermal cut-out. If for any reason the unit should overheat, the thermostat will
automatically turn the unit off.
Assembling your cylinder
Fully unwind the power
cord. A yellow mark on the
cord indicates the
recommended cord length.
Do not exceed the cord
beyond the yellow mark.
Slot the metal telescopic
extension tube and hose
handle together. All
accessories can be fitted
to the end of the metal
telescopic extension tube.
Plug in and switch the unit on
by pressing the power button.
How to use
For use on carpets click
rocker switch forward. For
use on hard floors click rocker
switch back.
To vary the suction power
open/close the sliders on the
hose handle.
Hard Floors
Carpets
Storage
Cable rewind button is
located at the rear of the
machine. After unplugging
press the cable rewind until
the cord is fully retracted.
For convenience there is a parking slot located at the rear of
the vacuum cleaner where the floor head and tubes can be
attached for storage and carrying
Insert the end of the hose
into the unit. Ensure the
hose has clicked into place.
PLEASE READ SAFETY INFORMATION BEFORE USE (p3)
Before plugging the cord into the electrical outlet, make sure the switch is in the ‘off’ position. Hold the vacuum cleaner firmly when starting and in use.
5
6
vax.co.uk
Looking After Your Machine – Filters
Getting Started