Turn the dirt container
lid anti-clockwise
to remove.
Wash pre-motor filter
under running water.
Lift to remove the
pre-motor filter out
of dirt container.
Tap the filter against a bin
to remove excess debris.
Leave to dry for 24 hours or
until fully dry before placing
back in the machine.
Using your machine
Taking care of your machine
MAX
40˚C
TA
P
24hr
Emptying and cleaning the dirt container
Cleaning the pre-motor filter
Hold dirt container over the bin.
Press release clip at the bottom
of the container, the dirt release
door will open allowing dirt/debris
to fall out.
Press dirt container
release button. Lift to
remove dirt container
from machine.
IMPORTANT:
Unplug and switch off vacuum cleaner before performing maintenance or troubleshooting checks.
NOTE:
For best cleaning results, tap the pre-motor filter over a bin every 4-6 uses to remove dirt and debris and
wash every 3 to 6 months (depending on the level of use).
Filters available at www.vax.co.uk
TIP
Don’t over fill the
dirt container to
avoid blocking the air
flow through the
vacuum cleaner.
