Vax Blade 5 User Manual Download Page 3

• Always remove the battery from the machine before carrying out any maintenance 

or if storing unused for a long period of time.

• Only VAX ONEPWR recommended tools and accessories should be used with this 

machine. 

• Keep all openings clear, free from debris and don’t overfill the dirt container as this 

may affect the airflow/suction.

• Turn off all controls on the machine before disconnecting or connecting the battery.

This machine is not intended to be used or cleaned by persons with reduced 

physical, sensory or mental capabilities, or lack of experience or knowledge, unless 

they have been given instructions concerning the safe use of the machine by a 

person legally responsible for their safety. They should be supervised whilst using 

the machine. Children shall not use, clean or play with this machine, which when 

not in use should be secured out of their reach.

• Only use the machine indoors on dry surfaces and keep the area you’re cleaning 

well lit.

• Keep fingers, hair and loose clothing away from moving parts and openings whilst 

using the machine.

• Store the machine in a cool, dry area. Keep the machine away from rain and 

moisture.

• Use only CE/UKCA approved 13amp extension cords, non-approved extension 

cords may overheat. Care should be taken to arrange the extension cord as it can 

be a trip hazard.

• Take extra care when using the machine on the stairs.

• Always turn the brushbar off when cleaning hard floors and surfaces.  

To prevent any damage being sustained, test on an inconspicuous area of the 

flooring/surface first.

• Always make sure the separator and filter are fitted correctly before using your 

machine and only use the machine with the filter and separator in place.

• Always check the powered floorhead, mini motorised pet tool and accessories are 

free from damage, dirt and debris before using.

• This machine does not stay upright without constant support. Between uses, lie flat 

on the floor in a suitable location so that it does not become a trip hazard or can be 

stepped on

.

Battery Safety Precautions

• Replace the battery with a VAX ONEPWR battery only. Use of another battery 

may present a risk of fire or explosion.

• Don’t attempt to disassemble the battery, remove any component projecting from 

the battery terminals and do not dispose of in a fire. The battery and charger 

have no user serviceable parts. Fire or injury may result.

• Prior to disposal, protect exposed terminals with heavy insulating tape to prevent 

shorting. The battery is to be disposed of safely at your local battery recycling 

centre.

• When the battery pack is not in use, keep it away from other metal objects 

that can make a connection from one terminal to another. Shorting the battery 

terminals together may cause burns or a fire.

• In case of battery leakages, avoid any contact with skin and contact us on:  

08000 927737

Summary of Contents for Blade 5



























Reviews: