user guide
advanced vacuum technology
upholstery & furniture
5
emptying the canister
user guide
advanced vacuum technology
6
2
Use the hose or the wand
When using the tools they can be connected
to the wand or the hose, depending on how far
you need to reach and how much control you want.
1
Remove the wand
And choose the tool you need
.
3
For sofas and chairs fit the crevice tool
This tool allows you to get right into the corners and small spaces.
4
For work surfaces
use the wand on it’s own
When cleaning surfaces use
the brush tool to avoid scratching.
5
For curtains use the stair tool
Air vents in the tool reduce the suction.
Twist the head of the tool for the best contact with your curtains.
3
...and lifting it out.
4
Tap the side of the canister
Do this several times to loosen up any dust that may
have become attached.
5
‘Click’ the dust release button
Do this three times, this will loosen any
dust that has become stuck to the filter itself.
6
Use the wand
For those hard to reach areas.
1
Keep an eye out
There is a line marked on the easyview canister, if dust
reaches this line it should be emptied.
2
Remove the easyview canister
By pushing the handle down...
6
Empty the canister
Release the trap door over a
bin by pushing the dust
release button downwards
7
Replace the canister
Make sure you have closed the trapdoor properly, then
push the canister back into place until you hear it click.
VAX AVC 10th D.Aus 16/8/01 9:43 am Page 7