Using your machine
Remove hose.
Remove extension tube.
Attach required tool to the hose.
Attach hose to
extension tube.
Attach accessory to
extension tube.
IMPORTANT:
Hold vacuum
cleaner when using hose
or extension tube for above
floor cleaning.
Hose
Extension tube
Before you begin cleaning
IMPORTANT:
Always switch off and unplug the vacuum cleaner before connecting or disconnecting the hose/
attachments, or removing and emptying the dirt container.
Always switch off the brushbar before using any accessories/hose/telescopic extension tube.
IMPORTANT:
The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does
overheat the thermostat will automatically turn the vacuum cleaner off. If this happens, switch the vacuum cleaner off
and unplug from electrical socket. Remove and empty the dirt container also check the vacuum cleaner for blockages.
Allow the vacuum cleaner to cool for approximately 1 hour (if you have cleaned the filters please wait 24 hours for the
filters to fully dry before putting back into the vacuum machine).
If the vacuum cleaner is blocked, switch off and unplug before removing the blockage.
The 2-in-1 tool can be
attached to the tube
or directly to the hose.
TIP
