Assembling your machine
Insert the end of the hose
into the unit. Ensure the
hose has clicked into place.
Insert the handle into the
telescopic extension tube.
Press the button on the
telescopic extension
tube and adjust to the
required length.
Insert the other end of
the telescopic tube into
the floorhead until it
clicks into place.
Getting to know your machine
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Getting started
Name
Vax Air Series
Voltage
See rating label on machine for details
Wattage
See rating label on machine for details
Cord length
6m - 8m
Weight
4.9 kg - 5.5kg
Technical Specification
Subject to technical change without notice.
Accessories & Consumables
To purchase consumables and accessories, please visit
vax.co.uk
Filter Kit (Type 95)
1-1-134231
3-in-1 Tool
1-9-130815
Upholstery Tool (Type 6)
1-9-132116
TurboTool (Type 6)
1-1-134419
Cord rewind button
Bin release button
Carry handle
Power On/Off button
IMPORTANT:
The condition of the filters affects the performance of your machine. Please check and clean filters
periodically (depending on the level of use). For full cleaning instructions, see ‘Taking care of your machine’.
Before you begin cleaning
• Always switch off and unplug the vacuum cleaner before connecting or disconnecting the hose/attachments, or removing
and emptying the dirt container.
• The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does overheat the thermostat
will automatically turn the vacuum cleaner off. If this happens, switch the vacuum cleaner off and unplug from electrical
socket. Remove and empty the dirt container and also check the vacuum cleaner for blockages. Allow the vacuum cleaner
to cool for approximately 1 hour (if you have cleaned the filters please wait 24 hours for the filters to fully dry before putting
back into the vacuum).
• Pre-motor filter requires cleaning at least every 3 months.
• If the vacuum cleaner is blocked, switch off and unplug before removing the blockage.
• When using the accessories always make sure the brushbar is switched to the off position.
IMPORTANT:
The base of the vacuum cleaner should always be positioned flat on the floor when starting and in use.
The dirt container should be locked into place before lifting the vacuum cleaner by the carry handle.
Hose inlet
Dirt container
Dirt container lid
Inner cyclone
Inner wheel and
filter housing
Floorhead parking slot
