Let’s talk technical
The brushbar indicator
light will illuminate red
and the brushbar will stop
spinning if the brushbar is
obstructed.
Press the On/Off button
to switch the vacuum
cleaner off. Unplug from the
mains.
Resetting/removing debris from the brushbar
IMPORTANT:
Unplug and switch off vacuum cleaner before performing maintenance or troubleshooting checks.
If the brushbar has been obstructed, the brush bar motor protection sensor may have been activated. The brushbar
will stop and the light on the floorhead will illuminate red.
Plug in to the mains and
recline.
Press the On/Off button
to switch the vacuum
cleaner on.
Press the brushbar button
to activate the brushbar.
Lie the vacuum cleaner on
its back. Using a pair of
scissors remove any threads
or hair caught around the
brushbar.
Changing the brushbar/advanced brushbar cleaning
Using a crosshead
screwdriver, remove 3
screws from the belt cover
on the side of the floorhead.
Pull to remove the belt
cover and brushbar
location plate. Remove belt.
Lift and separate brushbar
side cover.
Pull brushbar through side
cover to remove. Using a
pair of scissors remove
any threads or hair caught
around the brushbar
before refitting.
