5
Vax Careline
0870 606 1248
preparing the cleaner
CAUTION: Solutions contain Anionic and
Nonionic Surfactants. Avoid contact with the
eyes and skin. In case of contact with eyes, flush with
cold water for 15 minutes. In case of contact with skin,
wash with water. If irritation persists, contact your GP.
Emptying the Recovery Tank
An automatic shut-off device prevents the cleaner from
picking up more dirty water than it can hold in the recovery
tank. You will know the tank needs to be emptied when:
• The amount of dirty water has reached the full line.
• When the motor sound rises in pitch.
• You do not see dirty solution coming up through the
nozzle.
• The float inside the recovery tank has risen to the top of
the tank.
Press recovery tank release button and remove tank from
the cleaner (Fig.3/7).
Release latches on tank cap and remove cap (Fig.3/8).
Empty tank and replace cap, securing both latches (Fig. 3/9).
Remove any debris that has collected on lint filter (A) on
cleaner body. Once clear, place bottom of tank onto
cleaner. Pivot top of tank and snap in place (Fig.3/10).
Attach the Hose
Place handle in upright position.
The hose and tool caddy can be removed from the cleaner
if you desire. Remove hose from tool caddy.
Open hose inlet (A) on back of deep cleaner. Align hose
connector with hose and solution ports (B). Push hose into
port and lock in place (Fig.3/11).
Fig.3/6
Fig.3/8
Fig.3/9
Fig.3/10
A
Fig.3/7
!
Vax V-123 User Guide.qxd 10/8/07 15:43 Page 5
