6
not at acidic
water position.
acidic water is selected for
dispensing.
Loud noise
The machine is not
placed steady
Make sure the unit is on a level floor or
counter strong enough to support it when
fully loaded.
Fuselage electric
leakage
The ground wire didn’t
connect to the ground
properly.
Use the standard triplex receptacle outlet
with leakage protector, and promptly
eliminate leakage fault.
Blue LED Blinks
four times every 1
second
Water is too pure to
ionize
Need to change the input water type.
Blue LED Blinks
twice every 1
seconds
Feed water flow is too
slow for ionizing the
water
Minimum flow rate for ionization should be
at least 0.6L/min.
Blue LED Blinks
once every 1
seconds
Previous water stored
inside the ionizer is
being discharged.
Wait for the LED blinking to stop, then use
the dispensed water
Technical Specification
Model Name
Water Element
Model Number
WE-UF-02
Rated Voltage
230V AC
Rated Frequency
50Hz
Protected Against
Electric Shock
Class I Type
Feed water type
Direct pipeline water as feed water input
Different water
levels
1.
Alkaline 3 (Strong) – pH 9.5
2.
Alkaline 2 (Medium) – pH 9.0
3.
Alkaline 1 (Mild) – pH 8.5
4.
UF Purified water
5.
Acidic water (Mild) – pH 5.5
6.
Acidic water (Strong) – pH 3.5
Please note that the pH value of the alkaline / acidic water will have a
tolerance of +/- 0.5 depending on feed tap water.
ACIDIC WATER IS NOT SUITABLE FOR DRINKING
Self-cleaning
Cleaning will start once every 10 cycles of alkaline / acidic water
being dispensed
Self-flushing
LED blinks once every 1s when water is flushing (when mode is
changed). Wait for the LED blinking to stop, then use the dispensed
water
Usage Guideline
1.
Ensure that the following piping are connected:
a.
inlet tap water to external PP filter input
b.
External PP filter output to the purifier inlet
c.
Purifier discharge to common discharge outlet
