background image

Thank you for choosing the VAVA Projection Screen. Please read this User Manual thoroughly 
before use and retain it for future reference.

With the constant optimization of the projector, instructions in this User Manual may not be 
totally applicable to the actual product.

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL SAFETY INFORMATION AND INSTRUCTIONS. KEEP FOR 
FUTURE REFERENCE.

     CAUTION

For optimal projection, safe installation and long lasting use of the screen, please always follow 
below instructions carefully:

·

Always handle the screen on a clean, level surface covered with clean cloth, film, etc. 

·

Gently hold and put down the unit to avoid any damage to the screen surface.

·

Do not touch the screen surface by hand. Before handling the screen, put on the pairs of 
gloves to avoid fingerprint, dust or hand oil on the screen surface.

·

Do not poke the screen surface with any sharp or hard objects to avoid scratches or tears.

·

It is recommended to clean the screen once every two weeks.

·

Wipe clean the screen with a soft cloth and lukewarm water. For general dust, use a soft 
brush (rough towels or cloth may damage the screen) to clean the screen surface.

·

Do not clean with abrasive detergent, solvent or other coarse chemicals to avoid permanent 
damage to the screen surface.

·

You may notice a slight smell for first-time use, which will dissipate over time. If the smell is 
too strong, open a window to ventilate the room.

·

Children should be supervised to ensure that they do not play with the screen. 

·

Please contact your local dealer for repair or maintenance. For any questions or concerns, 
please email us at [email protected] or call us at (877) 969-8282.

READ AND SAVE THESE INSTRUCTIONS

01

Summary of Contents for VA-LTS006



















Reviews: