Vauxhall Zafira Tourer, Owner'S Manual

Page: 248 / 289

246 Vehicle care
Attach wheel wrench and with the
jack correctly aligned rotate wheel
wrench until wheel is clear of the
ground.
6. Unscrew the wheel nuts.
7. Change the wheel. Spare wheel
3
246
8. Screw on the wheel nuts.
9. Lower the vehicle and remove
jack.
10. Install the wheel wrench ensuring
that it locates securely and tighten
each nut in a crosswise
sequence. Tightening torque is
140 Nm.
11. Align the valve hole in the wheel
cover with the tyre valve before
installing.
Install wheel nut caps.
12. Install vehicle jacking point cover.
13. Stow the replaced wheel
3
246,
the vehicle tools
3
234 and the
adapter for the locking wheel nuts
3
65.
14. Check the tyre pressure of the
installed tyre and the wheel nut
torque as soon as possible.
Have the defective tyre renewed or
repaired as soon as possible.
Jacking position for lifting platform
Rear arm position of the lifting
platform centrically under the recess
of the sill.
Front arm position of the lifting
platform at the underbody.
Spare wheel
Some vehicles are equipped with a
tyre repair kit instead of a spare wheel
3
241.
If mounting a spare wheel which is
different from the other wheels, this
wheel might be classified as a
temporary spare wheel and the
corresponding speed limits apply,