In brief
21
Swivel the seat rearward until it is
upright and audibly engages. Support
the top of the backrest with your hand.
Preparing belt buckles for use
3
54, Load compartment cover
3
68.
9
Warning
The belt must not be routed
through the belt holder when the
seat belt is in use.
Slide the second row of seats to the
required position and engage.
Storing seats
Remove the load compartment cover
3
68.
Push the lever forward and slide the
second row of seats forward to the
mark.
Press the catch to release and slide
the head restraints of the third row all
the way down.
Guide the seat belts through the belt
holders and insert the latch plates in
the holders.
From the load compartment, press
the button on the top of the backrest
and lower the backrest. Using the
handle on the seat, pull rearwards
and upwards and then swing the seat
forwards until it is lowered into the
vehicle floor. Hold the seat by the
handle during the entire procedure.
Retract belt buckle
3
54 and install
floor covering
3
69 and load
compartment cover
3
68.
Slide the second row of seats to the
required position and engage.
Ofrecido por www.electromanuales.com
Summary of Contents for Zafira 2010
