Vauxhall VIVARO, Owner'S Manual

Page: 181 / 231

Vehicle care 179
5. Push to install the bulb holder into
the lamp assembly, then rotate
clockwise to secure.
6. Reattach wiring connector to lamp
assembly.
7. Install lamp assembly with the
two bolts.
Number plate light
H1 roof height
1. Prise out lamp using a flat blade
screwdriver.
2. Detach wiring connector.
3. Prise off lens to release the clips.
4. Renew bulb.
5. Install lens and reattach wiring
connector.
6. Replace lamp in housing.
H2 roof height
1. Remove the two screws (using
the tool supplied) to release lens.
2. Renew bulb.
3. Install lens in housing and replace
the two screws.
Fog tail light
1. Remove the two bolts (using the
tool supplied) and remove lamp
assembly.
2. Detach wiring connector from
lamp assembly.
3. Rotate bulb housing anticlockwise
to separate from lamp assembly.
4. Renew upper bulb.
5. Push to install the bulb holder into
the lamp assembly, then rotate
clockwise to secure.