Instruments and controls
109
A
disappears
Retrieving service information
To retrieve the status of the service
information at any time press
F
,
G
or CHECK.
The service information is displayed
for a few seconds.
Instrument cluster
Control indicators
The control indicators described are
not present in all vehicles. The
description applies to all instrument
versions. Depending on the
equipment, the position of the control
indicators may vary. When the
ignition is switched on, most control
indicators will illuminate briefly as a
functionality test.
The control indicator colours mean:
red
: danger, important reminder
yellow : warning, information, fault
green : confirmation of activation
blue
: confirmation of activation
white : confirmation of activation
See all control indicators on different
instrument clusters
Turn lights
1
flash green.
Flash
Turn lights or the hazard warning
flashers are activated.
Rapid flashing: failure of a turn light or
associated fuse, failure of turn light on
trailer.
Bulb replacement
Seat belt reminder
a
illuminates or flashes in the
instrument cluster and in the
overhead console.
After the ignition has been switched
on,
a
illuminates until the seat belt
has been fastened.
When driving faster than 12 mph and
a seat belt is unfastened,
a
flashes in
the overhead console for the
respective seat and a chime is
audible.
Aditionally,
a
illuminates in the
instrument cluster.
After two minutes, the chime goes off
and
a
illuminates constantly in the
overhead console until the seat belt of
the respective seat is fastened.
Summary of Contents for Vivaro C
