Vauxhall Vivaro C, Owner'S Manual

Page: 229 / 289

Vehicle care 227
8. Push the bulb slightly down, turn
it and remove it from the bulb
carrier. Replace the bulb:
Tail light / parking light (1)
Reverse light (2)
Brake light / parking light (3)
Turn light / hazard warning flasher
(4)
9. Attach the bulb carrier to the light
assembly.
10. Attach the cable to the retainer.
11. Attach the light assembly to the
vehicle body and tighten both
screws.
12. Clip in cover which may have
covered the lower tail light
assembly screw.
13. Attach cover or air vent behind the
tail light if removed before.
Platform Cab
1. Remove the four screws from the
lens.
2. Remove lens from the aperture.
3. Push bulb into socket slightly,
rotate anticlockwise, remove and
renew bulb.
Turn light (1)
Brake light (2)
Tail light (3)
Reversing light (4)
Rear fog light, may be on one side
only (5)
4. Install lens in aperture and
replace the four screws.